Accessories:
Cleaners & Sealants & Polymeric Sand
Cleaners are products used in removing stains caused by
motor-oil, grease, rust, tar, rubber or paint stains, as well
as efflorescence and ground-in dirt.
Sealants are specially designed to protect pavers and
slabs made of concrete or natural stone. They reduce oil
and dirt penetration, and make cleaning easier.
Contact Expocrete or a local distributor of these
products for advice on what cleaner or sealant would
work best for you.
Polymeric Joint Sands
Polymeric Jointing Sand is a high-tech mix of graded sand
and binder, specially formulated for the filling of narrow or
wide joints when installing pavers, slabs or natural stone.
This sand remains stable and is effective in resisting water
erosion, frost, wind, street sweepers and inhibits weed
growth and insect infestation. Polymeric jointing sand is
applied dry and hardens after wetting.
RG POLYMERIC SAND:
Colours: Grizzly Tan & Glacier Grey
Bag: 30 kg / 66 lbs
Area Covered/Bag: 6-9 m2 65-100 sq ft
Required quantity will depend on the shape and size of the pavers or slabs, and on the width of joints. Temperature should be above 15ºC when applying.
HP POLYMERIC SAND:
Colours: Grizzly Tan & Glacier Grey
Bag: 23kg / 50 lbs
Area Covered/Bag: 4 - 7m2 / 49 - 79 sq ft
This High-Performance mix made of specially
formulated polymers is ideal for heavy-traffic
areas such as pool decks, sloped driveways
and public ways. It is recommended for the
replacement of existing joints. Temperatures should be above 5ºC when applying.
Used to fill joints on Megalith paver.